Hydrothermal systems in small ocean planets

We examine means for driving hydrothermal activity in extraterrestrial oceans on planets and satellites of less than one Earth mass, with implications for sustaining a low level of biological activity over geological timescales. Assuming ocean planets have olivine-dominated lithospheres, a model for cooling-induced thermal cracking shows how variation in planet size and internal thermal energy may drive variation in the dominant type of hydrothermal system-for example, high or low temperature system or chemically driven system. As radiogenic heating diminishes over time, progressive exposure of new rock continues to the current epoch. Where fluid-rock interactions propagate slowly into a deep brittle layer, thermal energy from serpentinization may be the primary cause of hydrothermal activity in small ocean planets. We show that the time-varying hydrostatic head of a tidally forced ice shell may drive hydrothermal fluid flow through the seafloor, which can generate moderate but potentially important heat through viscous interaction with the matrix of porous seafloor rock. Considering all presently known potential ocean planets-Mars, a number of icy satellites, Pluto, and other trans-neptunian objects-and applying Earth-like material properties and cooling rates, we find depths of circulation are more than an order of magnitude greater than in Earth. In Europa and Enceladus, tidal flexing may drive hydrothermal circulation and, in Europa, may generate heat on the same order as present-day radiogenic heat flux at Earth's surface. In all objects, progressive serpentinization generates heat on a globally averaged basis at a fraction of a percent of present-day radiogenic heating and hydrogen is produced at rates between 10(9) and 10(10) molecules cm(2) s(1).     

Detectability of planetary characteristics in disk-averaged spectra II: synthetic spectra and light-curves of earth

Spatially and spectrally resolved models were used to explore the observational sensitivity to changes in atmospheric and surface properties and the detectability of surface biosignatures in the globally averaged spectra and light-curves of the Earth. Compared with previous efforts to characterize the Earth using disk-averaged models, a more comprehensive and realistic treatment of the surface and atmosphere was taken into account here. Our results are presented as a function of viewing geometry and phases at both visible/near-infrared (0.5-1.7 microm) and mid-infrared (5-25 microm) wavelength ranges, applicable to the proposed NASA-Terrestrial Planet Finder visible coronagraph and mid-infrared interferometer and to the ESADarwin mission architectures. Clouds can change the thermal emission by as much as 50% compared with the cloud-free case and increase the visible albedo by up to 500% for completely overcast cases at the dichotomy phase. Depending on the observed phase and their distribution and type, clouds can also significantly alter the spectral shape. Moreover, clouds impact the detectability of surface biosignatures in the visible wavelength range. Modeling the disk-averaged sensitivity to the "red-edge," a distinctive spectral signature of vegetation, showed that Earth's land vegetation could be seen in disk-averaged spectra, even with cloud cover, when the signal was averaged over the daily time scale. We found that vegetation is more readily discriminated from clouds at dichotomy (50% illumination) rather than at full phase. The detectability of phytoplankton was also explored, but was found to be more difficult to detect in the disk-average than land vegetation.     

超声速液体射流的气动特性

介绍了有关脉冲超声速水射流以及柴油射流气动特性的研究结果。水射流实验是在一台垂直设置的内径为8mm的火药枪设备上进行的。用出口直径为5mm的喷嘴,产生了速度为600m／s的水射流。用纹影仪观察了射流及激波形状,从而测量了激波与前体驻点之间的离开距离。柴油射流实验是在一台水平设置的高压氮气气枪设备上进行的。     

Formation of polymer micro-agglomerations in ultralow-binder-content composite based on lunar soil simulant

We report results from an experiment on high-pressure compaction of lunar soil simulant (LSS) mixed with 2–5?wt% polymer binder. The LSS grains can be strongly held together, forming an inorganic-organic monolith (IOM) with the flexural strength around 30–40?MPa. The compaction pressure, the number of loadings, the binder content, and the compaction duration are important factors. The LSS-based IOM remains strong from ?200?°C to 130?°C, and is quite gas permeable.     

Michelson Interferometer for Global High-Resolution Thermospheric Imaging (MIGHTI): Instrument Design and Calibration

The Michelson Interferometer for Global High-resolution Thermospheric Imaging (MIGHTI) instrument was built for launch and operation on the NASA Ionospheric Connection Explorer (ICON) mission. The instrument was designed to measure thermospheric horizontal wind velocity profiles and thermospheric temperature in altitude regions between 90 km and 300 km, during day and night. For the wind measurements it uses two perpendicular fields of view pointed at the Earth’s limb, observing the Doppler shift of the atomic oxygen red and green lines at 630.0 nm and 557.7 nm wavelength. The wavelength shift is measured using field-widened, temperature compensated Doppler Asymmetric Spatial Heterodyne (DASH) spectrometers, employing low order échelle gratings operating at two different orders for the different atmospheric lines. The temperature measurement is accomplished by a multichannel photometric measurement of the spectral shape of the molecular oxygen A-band around 762 nm wavelength. For each field of view, the signals of the two oxygen lines and the A-band are detected on different regions of a single, cooled, frame transfer charge coupled device (CCD) detector. On-board calibration sources are used to periodically quantify thermal drifts, simultaneously with observing the atmosphere. The MIGHTI requirements, the resulting instrument design and the calibration are described.     

A bacterial enrichment study and overview of the extractable lipids from paleosols in the Dry Valleys, Antarctica: implications for future Mars reconnaissance

The Dry Valleys of Antarctica are one of the coldest and driest environments on Earth with paleosols in selected areas that date to the emplacement of tills by warm-based ice during the Early Miocene. Cited as an analogue to the martian surface, the ability of the Antarctic environment to support microbial life-forms is a matter of special interest, particularly with the upcoming NASA/ESA 2018 ExoMars mission. Lipid biomarkers were extracted and analyzed by gas chromatography--mass spectrometry to assess sources of organic carbon and evaluate the contribution of microbial species to the organic matter of the paleosols. Paleosol samples from the ice-free Dry Valleys were also subsampled and cultivated in a growth medium from which DNA was extracted with the explicit purpose of the positive identification of bacteria. Several species of bacteria were grown in solution and the genus identified. A similar match of the data to sequenced DNA showed that Alphaproteobacteria, Gammaproteobacteria, Bacteriodetes, and Actinobacteridae species were cultivated. The results confirm the presence of bacteria within some paleosols, but no assumptions have been made with regard to in situ activity at present. These results underscore the need not only to further investigate Dry Valley cryosols but also to develop reconnaissance strategies to determine whether such likely Earth-like environments on the Red Planet also contain life.     

From the Heart of China

Chcngdu, in the province of Sichuan , is known as the city for brocades and silk, and no doubt many of these products were loaded to camels on the long perilous journeys, destincd for the Western world via the Silk Road. The city has a very long history for being a trading, manufacturing and distribution center to all of Western China, which now has a huge population of 300 million.     

Constraints on the Structure of the Heliospheric Interface Based on Lyα Absorption Spectra

Spectroscopic observations of the hydrogen Lyα lines from nearby stars taken by the Hubble Space Telescope (HST) sometimes show absorption signatures from the heliosphere. This absorption is a unique diagnostic of material in the outermost parts of our heliosphere. We summarize how the HST data have been used to test various models of the heliosphere, particularly new 3-dimensional MHD models that have recently become available. We also focus on new detections of heliospheric absorption in very downwind directions, which can only be modeled using heliospheric model codes with extended grids in the downwind direction. We illustrate a couple attempts to reproduce this absorption using a couple of these extended tail models.     

First measurements of cosmic-ray nuclei at high energy with CREAM

The balloon-borne cosmic-ray experiment CREAM-I (Cosmic-Ray Energetics And Mass) recently completed a successful 42-day flight during the 2004–2005 NASA/NSF/NSBF Antarctic expedition. CREAM-I combines an imaging calorimeter with charge detectors and a precision transition radiation detector (TRD). The TRD component of CREAM-I is targeted at measuring the energy of cosmic-ray particles with charges greater than Z ∼ 3. A central science goal of this effort is the determination of the ratio of secondary to primary nuclei at high energy. This measurement is crucial for the reconstruction of the propagation history of cosmic rays, and consequently for the determination of their source spectra. First scientific results from this instrument are presented.